Keep my session open?
Ending In 
The session is expired
Your session has expired. For your security, we have logged you out.
Would you like to log in again?

CE Series Ovens, SHEL LAB


8070532 SGO5 8070530 8070531 SGO5-2 SMO3-2 8070535 SMO5 SGO3 8070533 8070536 8070537 9960516 SMO3 SGO3-2 9960517 8070534 SMO5-2
10356-046 89409-460 10356-042 10456-440 89409-462 89409-450 10456-418 89409-456 89409-452 10456-444 10356-024 10456-422 10456-412 89409-448 89409-454 10356-018 10356-020 89409-458
CE Series Ovens, SHEL LAB
Ovens Standard Ovens
The CE Oven Series has triple wall construction and easy-to-read microprocessor controls

The forced air ovens feature a 99 hr 59 min digital timer that has an independent control, so use is optional. Once the timer expires, the heating elements turn off while the blower continues running to cool the samples inside the oven.

The gravity convection ovens provide a degree of uniformity comparable to most forced air ovens on the market. The 99 min 59 hr digital timer has an independent control so its use is optional. Once the timer expires the power is cut to only the heating elements.

Whatever the application, the forced air ovens and gravity convection ovens provide a degree of uniformity and the peace of mind expected from the SHEL LAB brand.

Users can adjust the air exhaust from the chamber without being near the heat source. Even at operation temperatures of 225°C, the outer skin of this unit meets all CE requirements, so workspaces remain cool

Certifications: All of the SHEL LAB CE series ovens are CE approved.

Ordering information: 2-year limited warranty.


 

ORDER

SPECIFICATIONS

SERVICES


Services: Calibration Services (Single and Multiple Point- Conducted Prior to Shipment at Sheldon Manufacturing. Not on Customer Site)–We offer ‘Calibration Service’ where we calibrate the temperature to a customer stated set point. The test configuration uses multi-point thermocouples (9 probes minimum) usually with 4 run minimum stable run times. When a customer wants multiple temperatures, we can test these parameters, but the unit can be calibrated only to one set point at a time. We will require the final number at which the unit will be calibrated when it ships. The documentation will show data for all requested calibration set points. Standard documents are Certificate of Calibration and graphs (shipped with the unit and .pdf version for email if needed).
Factory Acceptance Test (FAT, Conducted Prior to Shipping at Sheldon Manufacturing. Not on Customer Site )–The FAT is a customized test procedure for different types of systems and the tests are executed at the factory. The actual test details and elements are specified by the customer and agreed to by the company so that the test protocols are mutually specified. Prior to delivery, customers want to make sure that equipment operates as intended without disturbances occurring on site. In achieving this, customers are therefore able to verify that all specifications and contractual requirements have been met. In some cases, the customer may want to witness the testing as is the case with FAT. This is a custom quoted service for each type of test needed (i.e. CO2, temp, RH, load configuration, etc.).
Certificate of Conformity (Conducted Prior to Shipment at Sheldon Manufacturing. Not on Customer Site )–This is a serial number specific testing option which is done to verify the unit will perform to and meet all stated specifications. This includes Hipot, Ground Bond, Current draw for max settings, and calibration (when applicable). Testing is designed in such a way as to verify all operational aspects, but we may not test each specific attribute (for example, the unit max current draw and controller operation will tell us the unit is capable of heating to max temperature without actually heating to the stated max temperature). Standard documents are Certificate of Conformity and QA check list (scanned and kept on file). Additional Offering is the QA Check Sheet; these are scanned on unit completion, and can be provided “On Request-FOC”. These documents are kept a minimum of 7 years from date of manufacture.
Factory Acceptance Test (Conducted Prior to Shipment at Sheldon Manufacturing. Not on Customer Site )–The FAT is a customized test procedure for different types of systems and the tests are executed at the factory. The actual test details and elements are specified by the customer and agreed to by the company so that the test protocols are mutually specified. Prior to delivery, customers want to make sure that equipment operates as intended without disturbances occurring on site. In achieving this, customers are therefore able to verify that all specifications and contractual requirements have been met. In some cases, the customer may want to witness the testing as is the case with FAT. This is a custom quoted service for each type of test needed (i.e. CO2, temp, RH, load configuration, etc.).
Extended Warranty–The Extended Warranty Plan extends the equipment’s original warranty for an additional 1 year parts and labor (US and Canada only). This plan provides unlimited labor, parts, and travel, along with priority phone and e-mail support. The Extended Warranty option is available only at the time of the original equipment order. It is not available once the unit has been delivered.
Note: All service options are only valid at point of sale. Once you order the services for the corresponding products, Sheldon will mail you a work order documentation and in the meanwhile will hold the delivery of your products. Customers are required to fill the work order with your requirements such as calibration temperature point. After accomplish the work order, customers can either mail it back or Email scanned pdf to Sheldon (Email address will be provided in the work order). After receiving, Sheldon will conduct the services based on the work order.
Enter Certificate Details

Enter the Lot number:

Choose from recent batch/lot numbers:

Or
Review & Compare Alternatives
We found alternative products that can save you up to  per item-unit.  To compare product details, select up to 3 alternatives below and click Compare Selected.To add items to your basket, enter a quantity and click Add to Basket.

Original Product:

Description Catalog Number Availability Unit Your Price Price Per Qty
 

Terms & Conditions

Prices:
Prices shown are current at time of publication. Where changes have occurred, prices prevailing at the time of shipment will apply. Prices are subject to change without notice.

Quotations:
Our sales and customer service departments welcome quotations for laboratory set-ups and multiple-unit orders. Your inquiries are welcome and appreciated.

Payment Terms:
Payment terms are Net 30 Days on approved credit, F.O.B. warehouse or point of manufacture. Shipping charges are prepaid and added to the invoice. C.O.D. orders will be charged a $10.00 handling fee plus shipping charges. AMEX, MasterCard, and Visa are accepted.

Minimum Order:
There is no minimum order at BioExpress. Full case quantities or minimum quantities may apply to non-stock or specialty items.

DELIVERY & SHIPPING
All orders are shipped F.O.B. warehouse or point of manufacture. Shipping charges are prepaid and added to the invoice. Orders are usually shipped within 24 hours of receipt. We ship by the most efficient and economical means available. Extra charges apply to HAZMAT and dry ice shipments.

RETURN GOODS POLICY
If you would like to return an item, please call BioExpress customer service or contact your local representative for an RGA number. All returns must include an RGA number, include original packaging and be shipped prepaid. Items older than 30 days, sterile, or special order items are subject to review. A 15% restocking fee applies.

WARRANTIES AND LIABILITIES
BioExpress accepts no responsibility and shall not be held liable for loss, damage, expense, consequential, or accidental damage. This includes the damage to property, person, or premises resulting from these products. BioExpress MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURCHASE. BioExpress expressly disclaims all other warranties, whether express, implied or statutory, including the warranty of MERCHANTABILITY AND FITNESS FOR USE. In no event will BioExpress be liable for consequential damages arising from the use of products described in this catalog.

Print These Terms